Control centers

The following control centers are available for VETO biomass heating devices:

VETO-control centers are based on programmable Siemens logics and components. The burner power is controlled by the boiler water temperature. VETO-control centers keep the burner in the best efficiency range.

AT Log 1 or AT Log 2

AT Log control center (Ala-Talkkari)

AT Log 1

  • basic center for one feed screw
  • precise adjustment of work and break times
  • possibility to control also a moving grate, ash screw and automatic ignition
  • possibility for GSM alarms
  • AT Log 2 otherwise the same as AT Log 1, but intended for two feed screws

 

Veto Greenline M

control center for biomass heating

  • 7” touch screen
  • Siemens logic based control center
  • Cabable control
    • 2pc. feed screws
    • 2pc. ash screws
    • automatic sweeping (pneumatic)
    • moving grate
    • primary- and secondary blowers
    • automatic lightning system
    • program controlled watering valve

Accessories

  • Remote control packet
  • UPS-battery
  • GSM-alarm control
  • Buffer vessel packet
  • Smoke gas blower control packet

 

Veto Greenline XL

control center for bioheating

  • 7” touch screen
  • Siemens logic based control center
  • Cabable control
    • -2pc feed screws
    • -6pc ash screws
    • -smoke gas cleaner cell feeder
    • – automatic sweeping (pneumatic)
    • – moving grate
    • – primary- and secondary blowers
    • -smoke gas blower (3kW)
    • -automatic lightning system
    • -program controlled watering valve

Accessories

  • Remote control packet
  • UPS-battery
  • GSM-alarm control
  • Buffer vessel packet

 

Veto Control XL

control center for district heating plant

wood chip heating control center

Dryer control center Veto Control M Air

grain drying (dryer control)

Dryer control center Veto Control XL Air