Control centers
The following control centers are available for VETO biomass heating devices:
VETO-control centers are based on programmable Siemens logics and components. The burner power is controlled by the boiler water temperature. VETO-control centers keep the burner in the best efficiency range.
AT Log 1 or AT Log 2
AT Log 1
- basic center for one feed screw
- precise adjustment of work and break times
- possibility to control also a moving grate, ash screw and automatic ignition
- possibility for GSM alarms
- AT Log 2 otherwise the same as AT Log 1, but intended for two feed screws
Veto Greenline M
- 7” touch screen
- Siemens logic based control center
- Cabable control
- 2pc. feed screws
- 2pc. ash screws
- automatic sweeping (pneumatic)
- moving grate
- primary- and secondary blowers
- automatic lightning system
- program controlled watering valve
Accessories
- Remote control packet
- UPS-battery
- GSM-alarm control
- Buffer vessel packet
- Smoke gas blower control packet
Veto Greenline XL
- 7” touch screen
- Siemens logic based control center
- Cabable control
- -2pc feed screws
- -6pc ash screws
- -smoke gas cleaner cell feeder
- – automatic sweeping (pneumatic)
- – moving grate
- – primary- and secondary blowers
- -smoke gas blower (3kW)
- -automatic lightning system
- -program controlled watering valve
Accessories
- Remote control packet
- UPS-battery
- GSM-alarm control
- Buffer vessel packet
Veto Control XL
Dryer control center Veto Control M Air
Dryer control center Veto Control XL Air